BJZZS - CASTALL E-343 PART B

  • MSDS: BJZZS
  • Manufacturer: CASTALL INC
  • Product Name: CASTALL E-343 PART B
  • National Stock Number: 8030-01-309-1067
Product Identification

Product ID:CASTALL E-343 PART B
MSDS Date:07/15/1991
FSC:8030
NIIN:01-309-1067
Kit Part:Y
MSDS Number: BJZZS

Responsible Party
CASTALL INC
WEYMOUTH INDUSTRIAL PARK
EAST WEYMOUTH, MA 02189
US

Emergency Phone: 800-424-9300 CHEMTREC

Info Phone: 617-337-6075

Preparer: ROBERT DAVIS

Cage: DO809

Contractor
CASTALL INC EAST WEYMOUTH INDUSTRIAL PARK
EAST WEYMOUTH, MA 02189-1699 US

Telephone: 617-337-6075

Cage: 29966

Ingredients

TETRAETHYLENEPENTAMINE

CAS: 112-57-2

RTECS: KH8585000

Fraction By Weight: 45%


AMINOETHYLPIPERAZINYLETHYL-ETHLYENEDIAMINE

CAS: 31295-46-2

Fraction By Weight: 18%


TRIETHYLENE TETRAMINE

CAS: 112-24-3

RTECS: YE6650000

Fraction By Weight: 4%


PIPERAZINE

CAS: 6531-38-0

Fraction By Weight: 1%

Hazards

LD50 LC50 Mixture:LD50 SKIN ABSORP (RBT)-660 MG/KG; ORAL *
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: MAY CAUSE SEVERE IRRITATION WITH
CORNEAL INJURY WHICH MAY RESULT IN PERMANENT IMPAIRMENT OF VISION,
EVEN BLINDNESS. SKIN: SHORT SINGLE EXPOSURE MAY CAUSE SKIN BURNS.
MAY CAUSE ALLERGIC SKIN REACT ION IN SUSCEPTIBLE INDIVIDUALS. SKIN
ABSORPTION: A SINGLE PROLONGED EXPOSURE MAY RESULT IN THE MATERIAL
BEING ABSORBED**
Explanation of Carcinogenicity:*LD50 (RATS)-2140-3990 MG/KG.
Effects of Overexposure:**IN HARMFUL AMOUNTS. INGESTION: SINGLE DOSE
ORAL TOXICITY IS LOW. MAY CAUSE GASTROINTESTINAL IRRITATION,
ULCERATION, OR BURNS OF THE MOUTH AND THROAT. INHALATION: EXCESSIVE
EXPOSURE MAY CAUSE IRRITAT ION TO UPPER RESPIRATORY TRACT &
SENSITIZATION IN SUSCEPTIBLE INDIVIDUALS.

First Aid

First Aid:EYE: FLUSH W/WATER-30 MIN. PROMPT MEDICAL CONSULTATION IS
ESSENTIAL. SKIN: REMOVE UNCURED PRODUCT W/DRY CLOTH OR TOWEL, WASH
THOROUGHLY W/SOAP & WATER. CONSULT PHYSICIAN IF IRRIT DEVELOPS. DO
NOT USE SOLVENT TO REMOVE PRODUCT. INHALE: REMOVE TO FRESH AIR IF
EFFECTS OCCUR. CONSULT PHYSICIAN. INGEST: DO NOT INDUCE VOMIT. GIVE
LG AMOUNTS OF WATER OR MILK IF AVAILABLE & TRANSPORT TO MEDICAL
FACILITY.

Fire Fighting

Flash Point Method:PMCC
Flash Point:310 F>154C
Extinguishing Media:MOST STANDARD FIREFIGHTING AGENTS ARE SUITABLE. IE.
SAND, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICALS.
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR FULL PROTECTIVE
CLOTHING INCLUDING POSITIVE PRESSURE SELF-CONTAINED BREATHING
APPARATUS.
Unusual Fire/Explosion Hazard:DURING A FIRE, IRRITATING AND/OR TOXIC
GASES MAY BE PRESENT FROM THE DECOMPOSITION/COMBUSTION PRODUCTS.

Accidental Release

Spill Release Procedures:COVER SPILLS WITH DRY ABSORBENT MATERIAL SUCH
AS SAND OR SAWDUST; SCOOP UP AND PLACE IN AN APPROPRIATE CONTAINER.

Handling

Handling and Storage Precautions:STORAGE TEMPERATURE (MIN/MAX):
AMBIENT/80 F (27 C). TWELVE MONTHS AVERAGE SHELF LIFE IN ORIGINAL
SEALED CONTAINERS.
Other Precautions:PRODUCT IS SENSITIVE TO MOISTURE & EXCESSIVE HEAT.
STORE IN DRY AREA AWAY FROM EXCESSIVE HEAT. GROUND ALL TRANSFER
EQUIP. HOLD BULK STORAGE UNDER NITROGEN BLANKET. THIS PRODUCT
SHOULD NOT COME INTO CO NTACT W/COPPER OR COPPER-BEARING ALLOYS.

Exposure Controls

Ventilation:USE ONLY W/ADEQUATE VENTILATION. LOCAL EXHAUST VENTILATION
MAY BE NECESSARY FOR SOME OPERATIONS.
Protective Gloves:WEAR GLOVES.
Eye Protection:SAFETY GOGGLES ARE RECOMMENDED.
Other Protective Equipment:USE PROTECTIVE CLOTHING IMPERVIOUS TO THIS
MATERIAL. SELECTION OF SPECIFIC ITEMS SUCH AS BOOTS, APRON OR FULL
BODY SUIT.
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING IMMEDIATELY, WASH
SKIN AREA W/SOAP & WATER & LAUNDER CLOTHING SEPARATELY BEFORE
REUSE.
Supplemental Safety and Health
A SAFETY SHOWER SHOULD BE LOCATED IN THE IMMEDIATE WORK AREA.

Chemical Properties

Boiling Pt:B.P. Text:482F,250C
Vapor Pres:<1MM @ 20C
Vapor Density:6.53
Spec Gravity:0.99 G/CC
Solubility in Water:MIXES COMPLETELY
Appearance and Odor:AMBER, LOW VISCOUS LIQUID; AMINE ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
ACID, OXIDIZING MATERIALS, HALOGENATED ORGANIC COMPOUNDS.
Hazardous Decomposition Products:THERMAL DECOMPOSITION WILL PRODUCE
NITROGEN OXIDES WHEN BURNED.

Disposal

Waste Disposal Methods:LANDFILL OR INCINERATE UNDER CONDITIONS WHICH
MEET FEDERAL, STATE AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.